Four inspection gates, AQL 2.5 sampling and third-party inspection welcome — so what you receive matches what you approved.
Every order passes four checkpoints before it leaves our factory. Nothing ships on a single inspection.
The checks that matter most for outdoor gear — done in-house, against the approved sample.
Calipers, gauges and tolerance check against the approved sample.
Surface finish, colour, stitching, logo and printing.
Switches, zippers, buckles, LED, battery and sealing.
Material certificate review and incoming sample verification.
Load test on straps, carabiners, handles and seams.
Water column and spray test for bags and dry bags.
Colour fastness and UV resistance for outdoor exposure.
Carton drop test and packaging integrity check.
We inspect to AQL 2.5, General Inspection Level II — the same standard used by major importers and third-party laboratories.
| Lot size (pcs) | Sample size | Accept | Reject |
|---|---|---|---|
| 501 – 1,200 | 80 | 5 | 6 |
| 1,201 – 3,200 | 125 | 7 | 8 |
| 3,201 – 10,000 | 200 | 10 | 11 |
| 10,001 – 35,000 | 315 | 14 | 15 |
| 35,001 – 150,000 | 500 | 21 | 22 |
You do not have to take our word for it.
SGS, BV, TÜV, Intertek and other agencies are welcome on site.
You or your agent can visit the factory at any time during production.
Sampling, unpacking, testing and re-check — we support the whole process.
Inspection reports are archived and available on request.
Certificates and compliance documents are issued per order where required, and available on request.
Tell us your product and target market — we will walk you through the inspection plan for your order.
Ask about quality control